Skip to content
An RFA technician's gauges and work light on an open HVAC condenser unit at a Dallas–Fort Worth property at night

DFW residential & multifamily property services

Keys toLeasing-ready.One vendor.

RFA runs HVAC, make-ready, flooring, cleaning, and repairs for Dallas–Fort Worth properties — every trade in a unit turn, coordinated by one accountable team.

Serving Dallas–Fort Worth & surrounding communities

  • 01Dallas–Fort Worth
  • 02Residential + multifamily
  • 03Every trade in a turn
  • 04One accountable team

Services

Every trade a turn needs.

From a single work order to a full unit turn, one team covers what a DFW property needs — coordinated, not subcontracted out.

A vacant DFW apartment unit mid make-ready — fresh paint, new floor, appliances set
The whole turn

Full turnkey unit turns that get vacant units leasing-ready fast, coordinated under one vendor.

On file

Three jobs, documented.

Recent RFA work — what the crew walked into, and what they did. Documented start to finish.

Grounds & landscaping reset — after
Grounds & landscaping reset — before
BeforeAfter
File 01RFA-LAND-01

Grounds & landscaping reset

Pool / Property Services

Type
Commercial grounds
Location
Dallas–Fort Worth
Trades
Grounds · rock reset · edging
Duration
One visit

Walked intoA commercial property's foundation bed had come apart — weed barrier exposed, river rock scattered across the walkway and thinning out against the building.

RFA didCleared and re-set the bed, re-edged the border, and redistributed the rock to an even depth. Cleared, edged, and reset in a single visit.

Closed out
Blower motor replacement — after
Blower motor replacement — before
BeforeAfter
File 02RFA-HVAC-02

Blower motor replacement

HVAC & AC

Type
Multifamily unit
Trade
HVAC
Component
Blower assembly
Duration
Same day

Walked intoThe air handler's blower assembly had failed. The wiring was loose and the cabinet was showing its age.

RFA didDiagnosed the failure, replaced the blower motor and assembly, re-terminated the wiring, tagged it, and re-commissioned the unit the same day.

Closed out
After-hours service call
File 03RFA-HVAC-03

After-hours service call

HVAC & AC

Type
Multifamily
Trade
HVAC service
Timing
After hours
Location
Dallas–Fort Worth

Walked intoA condenser at a DFW community was down after hours, on a night the units still needed cooling.

RFA didDiagnosed the fault on-site under work lights, recharged the condenser, and verified operation before leaving — same night.

Your job could be file 04. Start a work order.

Pricing

Clear pricing.

Published rates for the housekeeping and make-ready work RFA handles every day. Condition-dependent jobs — renovations, flooring, HVAC, service calls — are scoped individually so the number reflects the real work.

Housekeeping / Cleaning
Service1 BR2 BR3 BR
Standard Housekeeping$110$120$140
Extra Dirty$160$170$180
Touch-Up Housekeeping$55$65$70
Make Ready
Service1 BR2 BR3 BR
Basic Make Ready$200$250$300
Heavy / Renovation Make ReadyScoped after walkthrough

Scoped after a walkthrough — condition and repair scope vary too much for a flat rate.

Priced by scope
01

Flooring & Carpet

Priced by Scope

Carpet, vinyl, tile, and hard-surface flooring — priced by material, unit size, and current condition.

02

Service Call Pricing

Contact for Current Pricing

Trip and diagnostic pricing for one-off work orders and repair calls, quoted per visit.

03

HVAC / AC Service

Request Estimate

Service, repair, and replacement pricing depends on the system, unit, and scope of work required.

04

Additional Services

Contact for Current Pricing

Pool and grounds upkeep, general maintenance, and other property services outside the categories above.

Pricing notes

What affects an estimate

Every unit is walked before it's quoted — condition, access, and scope set the number, not a flat guess.

An inspection clipboard, unit keys, and a tape measure on the counter of an empty apartment during a scoping walkthrough
On-site walkthrough · before scope
  1. 01

    Unit Count & Turn Volume

    How many units need to be turned, and how often, shapes scheduling and overall project scope.

  2. 02

    Trade Mix

    Estimates reflect the specific trades a unit or property needs — HVAC, flooring, drywall, fixtures, and more.

  3. 03

    Property Size & Unit Type

    Square footage, unit layout, and property type all factor into labor and material requirements.

  4. 04

    Turnaround Timeline

    Standard timelines and expedited turns are scoped differently to match your leasing calendar.

Rates reflect standard, ready-access units in typical condition. Pricing may vary with unit condition, access, and scope.

Built for property managers

A simpler way to
maintain property.

Unit turns move through more vendors than they should. RFA delivers every trade through one accountable point of contact.

One Vendor, Multiple Trades

Coordinate HVAC, flooring, cleaning, maintenance, and more through a single point of contact instead of juggling separate vendors.

DFW Coverage

Serving residential and multifamily properties across the Dallas-Fort Worth area.

Residential & Multifamily Capability

Built to handle single homes and full property portfolios, from one-off repairs to complete unit turns.

Simplified Property Maintenance

Fewer vendors to schedule, track, and manage means a simpler maintenance workflow for owners and property managers.

The turn, coordinated

One vendor moves the unit through every stage — you get one point of contact, not five.

  1. 01Make Ready
  2. 02Cleaning
  3. 03Flooring
  4. 04HVAC
  5. 05Unit Ready

Have a unit
ready to turn?

Tell us about the property and what it needs. RFA coordinates every trade to get it leasing-ready — one vendor, start to finish.

Serving Dallas-Fort Worth, TX and surrounding DFW communities.

Call RFAStart a work order